Please Note: Beams are only available for ‘collection from Store’ or local Delivery within 20 miles.
The Burley Environ is flueless gas fire designed for installation into a standard fireplace opening. It boasts a real flame set behind a glass panel and benefits from not requiring a chimney or flue.
A flueless gas fire can be fitted in minutes rather than several hours. It is an extremely simple and problem free operation provided the Gas Safe registered fitter follows the installation instructions. If it is to go in an open chimney, then the flue must be blocked. Apart from that the fire just needs connecting and testing, and a 100cm² air vent fitting. With all the heat entering the room, the Environ boast a 100% efficiency rating and has a maximum output of 2.5kW.
When fitting a flueless fire such as the Burley Environ, it does not need to be sealed to the fireplace opening and flueless gas fires do not have to be installed on an outside wall. As no flue is required, thousands of pounds can be saved by not building a new chimney or restoring a condemned one.
The Environ is available in a Brass & Black, Brass, Chrome or Stainless Steel finish and is supplied with a coal effect fuel bed.
Recess requirement of 95mm (3¾”) when insetting into a standard, 16″ fireplace opening. If inset depth is not available, an optional spacer frame is offered allowing for flush fitting against the back panel.
- Available in Brass & Black, Chrome, Black, Stainless Steel or Brass finish
- 2.5kW heat output
- 100% efficiency
- Choice of manual, slide or remote control
- Minimum Room Size: 30m³
- Minimum 100cm² air vent required
- Coal effect fuel bed
- Available as Natural gas or LPG
- Dimensions H 612mm x W 518mm x D 240mm